MCP servers › co.kulhad › kulhad

MCP server · registry snapshot 2026-10-23 · last tested 2026-10-23

co.kulhad/kulhad

Run a UPI creator support page from chat: supporters, goals, page, share assets. No money moves. — the publisher's description

1 of 2 record checks metRead-only · tools listed 2026-10-23Topic: finance-and-payments · AI-classifiedPricing: freemium · AI-classifiedversion 1.0.0streamable HTTP44 tools

Summary

co.kulhad/kulhad is a remote MCP server listed in the official MCP registry at version 1.0.0. On 2026-10-23 ProtocolProbe connected to it in read-only mode and read its inventory: 44 tools, 0 resources and 4 prompts.

Record checks

1 of 2 record checks met · 7 do not apply

met: Registry entry is active and says how to run it
not met: Source repository link opens
not applicable: Repository is not archived
not applicable: Code pushed to the repository in the 90 days before our check
not applicable: Repository publishes a security policy (SECURITY.md)
not applicable: Package names its licence with a standard (SPDX) identifier
not applicable: The version the registry lists can be installed and is not withdrawn
not applicable: npm package carries build provenance (attestation)
not applicable: No known critical or high advisory in the package or its dependencies

Not ranked by downloads: a remote server publishes no download figure
Not ranked by stars: no public GitHub repository

From public records, not a safety rating. Each check with its reason · Is it safe to install?

Key facts

Runs: remote (hosted by the publisher)
Transport: streamable HTTP
Sign-in: none needed to open a session
Tools: 44
Described as changing data: 23 of 44 toolsAI-classified
Topic: finance-and-paymentsAI-classified
Pricing: freemiumAI-classified
Last tested: 2026-10-23

Add to your client

Observed fact

This server accepted a session without any credential and lists 25 tools whose name or declaration suggests they change data (update_profile, update_page_appearance, update_page_behaviour, update_seo, set_saved_replies and 20 more). That is our reading of the names; we did not call them. Source: our connection, 2026-10-23.

Worth knowing before you connect it

23 tools are described as changing something (start_signup, update_profile, update_page_appearance, …): our AI model's reading of the descriptions, not something we tested, and the server opened a session without any credential. We did not call them.

Each line comes from a section below, with its source and date.

How fresh this is

Live-tested: yes, a real session (not a text-only review)
Last tested: 2026-10-23
Mode: read-only (no tool calls)
Latest version: 1.0.0, published 2026-10-15 (registry, as of the 2026-10-23 snapshot)
First listed version: 2026-10-15 (earliest version still in the registry; older removed versions would be earlier)
Registry data: snapshot 2026-10-23
Package and repository: checked 2026-10-22
Engine: mcp-runtime-engine@0.1.0 · sdk@1.32.0

Changes since the last refresh

New in the registry: not in the list of 2026-10-04, listed on 2026-10-23 with version 1.0.0 (published 2026-10-15).

Source: the official MCP Registry list on 2026-10-04 and on 2026-10-23.

What it is

What does this server offer?

Observed inventory

44tools

0resources

4prompts

23 of 44 tools are described as changing something (creating, editing, deleting, sending or running). For 4 the reading was uncertain, so no mark is shown.

check_username_availablereads or searches
“Check whether a Kulhad page name is free.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
1 input, 1 required
- usernamestringrequired“The page name to check, without the address around it.”
start_signupon 7 other serverscreates or changes datadescribed as changing data
“Get a link that opens Kulhad sign-up with a page name already filled in.”
Publisher declares: read-only no · destructive no · idempotent yes · open-world no
1 input, 1 required
- usernamestringrequired“The page name to reserve and prefill.”
get_my_profileon 17 other serversreads or searches
“Read the page details for the signed-in creator: name, page address, bio, links, language, plan, and any custom domain recorded on the account with its status (pending, active or disabled).”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
get_page_settingsreads or searches
“Read the current appearance and behaviour settings for the page: theme, banner, suggested amounts, what is shown publicly, and the thank-you note.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
update_profileon 45 other serverscreates or changes datadescribed as changing data
“Change the creator's name, bio, page address, kind of page (person or organisation), page language, dashboard language, and the links on the page.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
7 inputs
- namestring“The name shown on the page.”
- biostring“A short introduction.”
- usernamestring“The page address, as in kulhad.co/priya.”
- kindstring
- pageLanguagestring“The language the public page is written in.”
- uiLanguagestring“The creator dashboard language.”
- socialsarray“Replaces the whole list.”
update_page_appearancecreates or changes datadescribed as changing data
“Change the page theme and the announcement banner across the top of it.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
8 inputs
- themestring“Premium.”
- themeColorstring“A six-digit colour code starting with a hash, for the custom theme.”
- badgeHiddenboolean“Hide the "Powered by kulhad" badge.”
- gaMeasurementIdstring“A Google Analytics ID like G-XXXXXXXXXX.”
- occasionTextstring“The banner text.”
- occasionUntilstring or null“The last day the banner shows, as YYYY-MM-DD.”
- occasionColorstring“The banner colour.”
- occasionColorHexstring“The banner colour when occasionColor is "own", as a six-digit code starting with a hash.”
update_page_behaviourcreates or changes datadescribed as changing data
“Change what the page does: whether new supporters go up without approval, whether people may give without a name, whether the supporter count and total show, the three suggested amounts and their lab…”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
11 inputs
- autoPublishboolean“Put a supporter on the page as soon as they mark a payment as sent, without waiting for approval.”
- allowAnonymousboolean“Let people give without leaving a name.”
- showSupporterCountboolean“Show how many people have given.”
- showTotalRaisedboolean“Show the total amount received.”
- counterQrEnabledboolean“Offer the printable counter QR, which carries no amount and no message.”
- voiceBlessingsEnabledboolean“Let supporters record a short voice message.”
- amountStylestring“Which set of suggested amounts the page offers.”
- amountsarray“The three suggested amounts and what each is for.”
- thankYouNotestring“Shown to a supporter after they pay.”
- cardHeadlinestring“The line above the name on share cards.”
- streamAlertOnstring“When the stream alert overlay fires.”
update_seocreates or changes datadescribed as changing data
“Set the title (up to 60 characters) and description (up to 160) in the page's HTML head, which search engines and link previews read.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
2 inputs
- seoTitlestring
- seoDescriptionstring
set_saved_repliescreates or changes datadescribed as changing data
“Replace the list of ready-made thank-you replies the creator picks from when approving a supporter.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
1 input, 1 required
- repliesarrayrequired
get_dashboard_summaryon 3 other serversreads or searches
“The headline numbers from the creator dashboard: what came in this month against last, the all-time total, how many approved supports there have been, and how many are waiting to be approved.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
list_pending_supportsreads or searches
“List the supporters who have marked a payment as sent and are waiting for the creator to approve them.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
1 input
- limitinteger“How many to return.”
list_supportsreads or searches
“List supporters, newest first, optionally narrowed by status or by date.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
5 inputs
- statusstring“claimed means waiting for the creator to approve.”
- fromstring“Only from this date onward, as YYYY-MM-DD.”
- tostring“Only up to this date, as YYYY-MM-DD.”
- limitinteger
- pageinteger

Show 32 more tools

get_supporton 2 other serversreads or searches
“Read everything the creator can see about one supporter, by its id.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
1 input, 1 required
- idintegerrequired“From list_supports or list_pending_supports.”
approve_supportcreates or changes datadescribed as changing data
“Approve one supporter after the creator has found the payment in their own bank app.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
3 inputs, 1 required
- idintegerrequired
- hiddenboolean“Keep the message and any voice recording private.”
- replystring“A thank-you shown beside them on the page, up to 280 characters.”
reject_supportdeletesdescribed as changing data
“Reject one supporter when the creator has checked their bank and the payment is not there.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
1 input, 1 required
- idintegerrequired
reply_to_supportercreates or changes datadescribed as changing data
“Write or replace the thank-you beside one supporter, up to 280 characters; links and flagged words are refused.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
2 inputs, 2 required
- idintegerrequired
- replystringrequired“Shown publicly beside them on the page.”
bulk_approve_supportscreates or changes datadescribed as changing data
“Approve up to 100 waiting supporters at once after the creator has checked their bank.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
2 inputs, 1 required
- idsarrayrequired
- hiddenboolean“Keep each message and voice recording private.”
bulk_reject_supportsdeletesdescribed as changing data
“Reject up to 100 waiting supporters at once.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
1 input, 1 required
- idsarrayrequired
list_goalson 7 other serversreads or searches
“List every goal on the page, the active one first, with how much each has raised against its target.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
get_goalon 5 other serversreads or searches
“Read one goal in full, including its impact tiers and its progress notes.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
1 input, 1 required
- idintegerrequired
create_goalon 5 other serverscreates or changes datadescribed as changing data
“Create a goal with a title and a target in whole rupees.”
Publisher declares: read-only no · destructive no · idempotent no · open-world no
6 inputs, 2 required
- titlestringrequired
- targetAmountintegerrequired“In whole rupees.”
- descriptionstring
- deadlinestring or null“As YYYY-MM-DD.”
- impactarray“What each amount pays for, shown on the goal.”
- activeboolean“Show it on the page straight away.”
update_goalon 4 other serverscreates or changes datadescribed as changing data
“Change a goal's title, target, description, deadline or impact tiers.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
6 inputs, 1 required
- idintegerrequired
- titlestring
- targetAmountinteger“In whole rupees.”
- descriptionstring
- deadlinestring or null“As YYYY-MM-DD.”
- impactarray“What each amount pays for, shown on the goal.”
set_active_goalcreates or changes datadescribed as changing data
“Make one goal the one shown on the page, or turn the current one off.”
Publisher declares: read-only no · destructive no · idempotent yes · open-world no
2 inputs, 1 required
- idintegerrequired
- activeboolean“False turns this goal off and shows none.”
delete_goalon 3 other serversdeletesdescribed as changing data
“Delete a goal that has no approved support.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
1 input, 1 required
- idintegerrequired
post_goal_updatecreates or changes datadescribed as changing data
“Add a short note, up to 280 characters, under a goal saying what the money did.”
Publisher declares: read-only no · destructive no · idempotent no · open-world no
2 inputs, 2 required
- goalIdintegerrequired
- bodystringrequired“What happened.”
delete_goal_updatedeletesdescribed as changing data
“Remove one progress note from a goal by its position in the list, counting from zero with the newest first.”
Publisher declares: read-only no · destructive yes · idempotent no · open-world no
2 inputs, 2 required
- goalIdintegerrequired
- indexintegerrequired“Zero is the newest note.”
list_upi_idsreads or searches
“List the UPI IDs on the account, which are the addresses supporters pay into.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
add_upi_idcreates or changes datadescribed as changing data
“Add a UPI ID for supporters to pay into.”
Publisher declares: read-only no · destructive no · idempotent no · open-world no
3 inputs, 1 required
- vpastringrequired“The UPI address, as in priya@okhdfc.”
- labelstring“What to call it, such as Personal or Shop.”
- makeDefaultboolean“Quote this one first.”
update_upi_idcreates or changes datadescribed as changing data
“Change the address or label of a UPI ID, switch it on or off, or mark the one-rupee test done.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
5 inputs, 1 required
- idintegerrequired
- vpastring
- labelstring
- activeboolean
- testDoneboolean“Only set this true when the creator says they saw the rupee arrive.”
set_default_upi_idcreates or changes datadescribed as changing data
“Make one active UPI ID the one supporters are shown first.”
Publisher declares: read-only no · destructive no · idempotent yes · open-world no
1 input, 1 required
- idintegerrequired
remove_upi_iddeletesdescribed as changing data
“Remove a UPI ID from the account.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
1 input, 1 required
- idintegerrequired
set_upi_rotationcreates or changes datadescribed as changing data
“When on, active UPI IDs take turns being quoted so support spreads across them instead of landing in one account.”
Publisher declares: read-only no · destructive no · idempotent yes · open-world no
1 input, 1 required
- enabledbooleanrequired
get_share_assetsreads or searches
“Get the page address, a QR code that opens the page (and a UPI payment QR for the counter when the counter QR is switched on), share images for stories and posts, and the printable sheets.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
get_embed_codeon 3 other serversreads or searches
“Get the HTML to put a support button, the pay card, or a live goal bar on the creator own website or blog.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
2 inputs
- textstring“The words on the button.”
- positionstring“Which bottom corner the floating button sits in.”
get_stream_overlaysreads or searches
“Get the three overlay addresses to add to OBS or any streaming software as a browser source: a goal bar, a wall of recent supporters, and an alert that appears when someone gives.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
3 inputs
- languagestring“Which language the overlays speak.”
- wallRowsinteger“How many supporters the wall shows at once.”
- alertSecondsinteger“How long each alert stays on screen.”
send_test_alerton 3 other serverssends messagesdescribed as changing data
“Fire a test alert so the creator can see where it lands in OBS while setting up.”
Publisher declares: read-only no · destructive no · idempotent no · open-world no
Takes no inputs.
get_analyticson 32 other serversreads or searches
“Daily page views, approved supports and amounts for up to the last ninety days, thirty by default, with the rate at which visitors go on to support.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
1 input
- daysinteger“How many days back.”
get_wrappedreads or searches
“Kulhad Wrapped for a year: how many people supported, the total, page views, the busiest month, and the largest single support.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
1 input
- yearinteger“Defaults to the current year.”
get_support_sourcesreads or searches
“Break approved support down by where it came from: the page itself, an embedded button, a QR code, the printed counter card, or a link tagged for WhatsApp, Instagram, YouTube or a standee.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
2 inputs
- fromstring“Only from this date onward, as YYYY-MM-DD.”
- tostring“Only up to this date, as YYYY-MM-DD.”
get_plan_and_billingreads or searches
“Read which plan the account is on, when Premium runs to, whether it is set to end, and the past charges with links to their invoices.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
get_custom_domainon 1 other server
“Read whether a custom domain is connected to the page, and what DNS record it needs.”
Publisher declares: read-only yes · destructive no · idempotent yes · open-world no
Takes no inputs.
set_custom_domainon 1 other server
“Record the domain the creator wants in front of their page and return the DNS record to add.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
1 input, 1 required
- domainstringrequired“For example: priya.in or support.priya.in”
verify_custom_domainon 2 other servers
“Look the domain up in public DNS and, if it points at Kulhad, switch the page to it; kulhad.co/<name> then redirects there.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world yes
1 input, 1 required
- domainstringrequired
remove_custom_domainon 5 other servers
“Disconnect the custom domain, so the page is served from its kulhad.co address again.”
Publisher declares: read-only no · destructive yes · idempotent yes · open-world no
Takes no inputs.

Each quoted sentence is the first sentence of the publisher’s own description. The kind of tool and the “changes data” mark are our AI model’s reading of that description, not something we tested: two differently worded runs had to agree, otherwise no label is shown, and nobody has checked them by hand. A tool without the “changes data” mark is described as only reading, searching or calculating, or the two runs did not agree. No tool was called. Read the publisher’s full description before relying on it. “Publisher declares” lists the hints the server itself sends with the tool (MCP annotations: read-only, destructive, idempotent, open-world); they are the publisher's claims, not checked by us. Inputs are the parameters in the tool's own input schema: name, declared type, whether it is required, and the first sentence of its description. Read 2026-10-23.

How well are its tools described?

Features #4 and #5

How clearly this server's own tool descriptions say what a tool does, and how consistent its tool list is. The first part is an AI model's yes/no reading of each description; the second part is counted. We do not turn it into a grade.

Descriptions

AI reading of each description

Says what the tool does: 100% of 40 tools
Says what it returns: 45% of 40 tools
States limits, defaults or errors: 67% of 36 tools
Says when to use it: 13% of 39 tools
Items covered per tool: 2.2 of 4 on average

Counted from the listing

Parameters with a description: 67% of 89
Tools with a description: 100% of 44
Typical description length: 255 characters

The tool set

Counted from the listing

Tools: 44
Size of the list: about 18,010 tokens for an agent to load (characters ÷ 4)
Naming: 44 of 44 names use snake_case

AI reading: easy to mix up

No pair found.

The AI items cover 40 of 44 tools: for a tool where two differently worded runs disagreed, that item is left out. They were not checked by hand, and no tool was called. “Easy to mix up” means two tools whose names or descriptions overlap without saying how they differ; the AI found none, comparing tools within groups of 40. We do not rate whether the tool set is complete or whether side effects are spelled out, because our AI reading of those was not reliable enough.

How do I add it to my client?

Config from the registry entry

From the remote endpoint (Streamable HTTP)

We connected to this URL on 2026-10-23 (a read-only session: no tool was called).

Add to CursorAn install link in the format Cursor documents, holding the Cursor config below.

Claude Desktop or claude.ai

Settings → Connectors → Add custom connector, then paste:
https://kulhad.co/mcp

Cursor · .cursor/mcp.json in a project, or ~/.cursor/mcp.json

{
  "mcpServers": {
    "kulhad": {
      "url": "https://kulhad.co/mcp"
    }
  }
}

VS Code · .vscode/mcp.json

{
  "servers": {
    "kulhad": {
      "type": "http",
      "url": "https://kulhad.co/mcp"
    }
  }
}

VS Code (command line) · Bash or zsh terminal (macOS, Linux)

code --add-mcp '{"name":"kulhad","type":"http","url":"https://kulhad.co/mcp"}'

Claude Code

claude mcp add --transport http kulhad https://kulhad.co/mcp

Try it in the MCP Inspector · runs on your machine, opens in your browser · Node 22.19+

npx @modelcontextprotocol/inspector@2.11.0 --server-url https://kulhad.co/mcp --transport http

The server runs on the operator's infrastructure; it may ask you to sign in when you first connect.
The MCP Inspector lists the server's tools, resources and prompts; a tool you call there runs for real.

Built from the server's registry entry with each client's documented format (checked 2026-10-14; the Cursor link and the VS Code command 2026-10-19; the MCP Inspector command 2026-10-21). Values in < > are yours to fill in; this page never contains a key. Where the server needs a setting the entry does not declare, it can still fail to start.

Does the registry listing match what we found?

Feature #6

The registry verifies a package once, when it is published, and does not re-check it. A difference below is about the listing, not a judgement of the publisher.

Registry says	We found	Result	Source · date
Remote endpoint kulhad.co/mcp	Session opened	matches	our test · 2026-10-23
No credential declared as required	Opened a session without any credential	matches	our test · 2026-10-23

Choosing

Record checks

Public records · not a safety rating

1 of 2 record checks met · 7 do not apply

Not ranked by downloads: a remote server publishes no download figure
Not ranked by stars: no public GitHub repository

MetRegistry entry is active and says how to run itActive, with a package or a remote address.
Not metSource repository link opensThe registry entry gives no repository link.
Does not applyRepository is not archivedNo public GitHub repository to read.
Does not applyCode pushed to the repository in the 90 days before our checkNo public GitHub repository to read.
Does not applyRepository publishes a security policy (SECURITY.md)No public GitHub repository to read.
Does not applyPackage names its licence with a standard (SPDX) identifierRemote server: it ships no package.
Does not applyThe version the registry lists can be installed and is not withdrawnRemote server: it ships no package.
Does not applynpm package carries build provenance (attestation)Remote server: it ships no package.
Does not applyNo known critical or high advisory in the package or its dependenciesRemote server: it ships no package.

Read from public records only: the registry entry, npm/PyPI, GitHub and advisory databases, checked 2026-10-22. No tool was called. Only “met” and “not met” are counted, so the total differs between servers; a check that does not apply or that we could not run is listed, never counted against it. It is not a safety rating. How each check works · Leaderboards

Common questions about co.kulhad/kulhad

Answered from the data above

Is co.kulhad/kulhad safe to install?

We do not rate servers as safe or unsafe. 1 of its 2 applicable record checks are met (facts from public records, each listed on this page). What the records show: 23 of its tools describe changing data (our AI model's reading of the descriptions). These are facts with their sources on this page, not a safety guarantee, and we did not run its tools.

Is co.kulhad/kulhad free to use?

Its website (kulhad.co/) describes a freemium pricing model. This is an AI-classified reading of the page on 2026-10-23, so check the page itself before relying on it.

Does co.kulhad/kulhad need an API key or sign-in?

It opened a session without any credential on 2026-10-23. The registry entry declares no required credential; no declaration is not a guarantee.

Has co.kulhad/kulhad been security tested?

Partly. 5 of the 16 checks that apply to it were exercised. It accepted a session without any credential and lists tools whose names suggest they change data. We did not call them. No security verdict is published before verification.

What can co.kulhad/kulhad do?

It lists 44 tools. In our AI model's reading of their descriptions (two runs had to agree, nobody checked it by hand), they include tools that read or search, create or change data, delete and send messages. We did not call any tool, so this describes the text, not the behaviour.

Can co.kulhad/kulhad change or delete data?

23 of its tools say in their description that they create, edit, delete, send or run something (our AI model's reading). We did not call any tool, so we cannot say what actually happens.

Found this page useful?

Anonymous · no sign-in

A quick, anonymous reaction — no account, no email. One per kind from your browser. The tally updates when the page is next refreshed, and it is only a rough count, never a safety rating or a measured number of people.

Similar servers

Same topic · AI-read

io.github.icyberdeveloper/tbank-mcpT-Bank MCPalso has tools that creates or changes data, deletes, reads or searches, sends messagescompare with this one
io.github.douglac/contaazul-mcpConta Azul MCPalso has tools that creates or changes data, deletes, reads or searches, sends messagescompare with this one
io.github.lightningfaucet/lightning-wallet-mcpLightning Walletalso has tools that creates or changes data, deletes, reads or searches, sends messagescompare with this one
io.github.lightningfaucet/mcp-serveralso has tools that creates or changes data, deletes, reads or searches, sends messagescompare with this one
io.github.mcp-dir/omie-mcpOmiealso has tools that creates or changes data, deletes, reads or searches, sends messagescompare with this one
io.github.gabrielmahia/mpesa-mcpalso has tools that creates or changes data, deletes, reads or searches, sends messagescompare with this one

Active servers whose topic is also “finance-and-payments” and that have at least one tool of the same kind; most kinds in common first, then most GitHub stars. The topic and the tool kinds are an AI model's reading of the publishers' descriptions, not checked by hand. Similar is not a recommendation.

Compare with another server

Side by side: registry entry, our read-only session, the tools and the 18 classification fields. Same values as each page; no score.

Security testing

What did we test, and what did we leave out?

18 checks · features #1, #2

Open without sign-in

It accepted a session without any credential and lists tools whose names suggest they change data. We did not call them. No security score is given; a check we did not run is never counted as passed.

The 18 checks at a glanceour test · 2026-10-23

Inventory: exercised
Hidden instructions: exercised
Real execution: not run · our policy
Secret leak: not run · nothing to check it against
Internal addresses: not run · our policy
Unconfirmed changes: not run · our policy
Bad input: not run · our policy
Model requests: not run · nothing to check it against
Sensitive questions: not run · nothing to check it against
Folder boundary: not run · our policy
Log leaks: not run · nothing to check it against
Hidden content: exercised
Fake assistant turns: exercised
Token passthrough: not applicable
Token audience: not applicable
Sign-in redirect: not run · our policy
Consent handling: not testable from outside
Sign-in metadata: exercised

5 exercised11 not run (reason given)2 not applicable

Each check ends in exactly one state: exercised, not run (with the reason), or not applicable (with the reason). 5 of the 16 checks that apply to it were exercised. We do not publish security-check outcomes for named servers.

Exercised · 5

1Inventory
tool-listReads the declared tools, resources and prompts.exercised
2Hidden instructions
description-poisoningLooks for hidden instructions in tool descriptions.exercised
12Hidden content
audience-hidingChecks resources that hide content from the user.exercised
13Fake assistant turns
fake-assistant-turnChecks prompts that pose as the assistant's own words.exercised
18Sign-in metadata
oauth-url-schemeChecks the published sign-in metadata for unsafe URLs.exercised

Not run, with the reason · 11

3Real execution
real-executionCalls a tool and checks what really happens.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes; an operator can run this check on their own server with our self-test command.not run · our policy
4Secret leak
canary-leakPlants a fake secret and checks whether it leaks.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
5Internal addresses
ssrfChecks whether a tool can be steered to internal addresses.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes; an operator can run this check on their own server with our self-test command.not run · our policy
6Unconfirmed changes
write-without-confirmationChecks whether tools that change data act without asking.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes; an operator can run this check on their own server with our self-test command.not run · our policy
7Bad input
error-handlingSends bad input and watches how the server answers.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes; an operator can run this check on their own server with our self-test command.not run · our policy
8Model requests
samplingChecks whether the server asks the client's model to act for it.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
9Sensitive questions
elicitation-sensitive-dataChecks whether the server asks users for sensitive data.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
10Folder boundary
root-boundaryChecks whether the server reaches outside the folders it was given.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes; an operator can run this check on their own server with our self-test command.not run · our policy
11Log leaks
logging-side-channelChecks whether log messages carry data they should not.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
16Sign-in redirect
open-redirectChecks the sign-in redirect for abuse.Testing the sign-in redirect means sending probes to the operator's sign-in service, which we do not do.not run · our policy
17Consent handling
confused-deputyChecks consent handling when one service acts for another.Depends on the operator's own consent screen, which differs per server and cannot be tested from outside.not testable from outside

Does not apply to this server · 2

14Token passthrough
token-passthroughChecks whether the server forwards a user's token to other services.The server opened a session without sign-in, so there is no token flow to check.not applicable
15Token audience
token-audience-validationChecks whether tokens meant for another service are accepted.The server opened a session without sign-in, so there is no token flow to check.not applicable

Source: our own test, 2026-10-23, mcp-runtime-engine@0.1.0. Which checks count and why follows our published scoring model.

What happened during the test?

Feature #8

The steps in order, as the test record holds them.

0 msStarted a read-only session with the server's remote endpoint
1,574 msConnected after 0 redirects. No credential was sent or needed.
Read the inventory: 44 tools, 0 resources, 4 prompts.
6,322 msFinished: 5 checks exercised.

Reference

How is it classified?

18 fields

One value per field, each with its source. Fields written by AI models are marked. A field with no value says why.

TopicAI-classified

finance-and-payments

AI-classified · 2026-10-23

Pricing modelAI-classified

freemium

read from kulhad.co/ · 2026-10-23

“Free forever”

Programming language

does not apply

no existing GitHub repository (server declares no repository link, so there is nothing to fetch)

Hosting type

remote (hosted by the publisher)

registry · 2026-10-23

MCP capability

prompts, tools

our test · 2026-10-23

Transport

streamable HTTP

registry · 2026-10-23

Required credentials

none declared

registry · no declaration is not a guarantee

Package registry

does not apply

remote-only server: no package is shipped, so there is no package registry

Freshness

0–30 days

registry updatedAt · 2026-10-23

Lifecycle status

active

registry · 2026-10-23

License class

does not apply

remote-only server: ships no package, so there is nothing to look up in a package registry

Integrity hash

does not apply

remote-only server: ships no package, so there is nothing to look up in a package registry

Signature / provenance

does not apply

remote-only server: ships no package, so there is nothing to look up in a package registry

Dependency advisories

does not apply

ships no package, so there are no dependencies to audit

Popularity

does not apply

remote-only server: ships no package, so there is nothing to look up in a package registry

Publisher signals

not stated

no readable GitHub owner to describe

Maintenance

does not apply

server declares no repository link, so there is nothing to fetch

Environment

the publisher's infrastructure

where it runs, from the hosting type

“Not stated” means the source did not state it; “does not apply” means it does not apply to this kind of server; “our limit” means our own lookup failed. A linked value opens the directory filtered to the same value.

Cite or correct this page

Sources and corrections

Suggested citation

ProtocolProbe. “co.kulhad/kulhad: MCP server record.” Data checked 2026-10-23. https://protocolprobe.com/mcp/servers/co.kulhad/kulhad

Figures are valid for the date shown. Our facts on this page are CC BY 4.0: reuse them with a link and the check date. Quoted text (the publisher’s descriptions, website quotes, tool names) is not ours to license.

As JSON: this record in the API · API documentation.

Badge for your README

[![ProtocolProbe](https://protocolprobe.com/api/v1/badge/co.kulhad/kulhad)](https://protocolprobe.com/mcp/servers/co.kulhad/kulhad)

It shows this server's record-check count: facts from public records, no tool called. It is not a security rating or a pass. It links here and updates after each data reload.

Something wrong, or is this yours?

If a fact here is wrong, tell us and we will re-check it. If you operate this server, you can run our checks on it yourself with the free self-test command; we call no server’s tools ourselves for anything shown here.

Write to hello@protocolprobe.com · corrections log · methodology