Skip to content

MCP servers › com.printlooper › printlooper

MCP server · registry snapshot 2026-11-16 · last tested 2026-11-16

printlooper MCP server

Registry name com.printlooper/printlooper

by printlooper.com · domain (the registry's namespace rule)Website ↗

Search 3D printable designs and print shops, and work on a Printlooper account from a chat. — the publisher's description

1 of 2 record checks metRead-only · tools listed 2026-11-16version 1.0.0streamable HTTP42 tools

Summary

com.printlooper/printlooper is a remote MCP server listed in the official MCP registry at version 1.0.0, under the namespace of the domain printlooper.com. On 2026-11-16 ProtocolProbe connected to it in read-only mode and read its inventory: 42 tools, 1 resource and 4 prompts.

Record checks

1 of 2 record checks met · 7 do not apply

  • met: Registry entry is active and says how to run it
  • not met: Source repository link opens
  • not applicable: Repository is not archived
  • not applicable: Code pushed to the repository in the 90 days before our check
  • not applicable: Repository publishes a security policy (SECURITY.md)
  • not applicable: Package names its licence with a standard (SPDX) identifier
  • not applicable: The version the registry lists can be installed and is not withdrawn
  • not applicable: npm package carries build provenance (attestation)
  • not applicable: No known critical or high advisory in the package or its dependencies
  • Not ranked by downloads: a remote server publishes no download figure
  • Not ranked by stars: no public GitHub repository

From public records, not a safety rating. Each check with its reason

Operate this server? Correct a fact · README badge · Run the checks yourself · Claim it

Key facts

Runs
remote (hosted by the publisher)
Transport
streamable HTTP
Your own values
none declared (not a guarantee)
Sign-in
none needed to open a session
Tools
42
Last tested
2026-11-16

Tool list size

13,621 tokens on Claude Opus 5.5

Added to every request that loads this server's tools (42 tools). Counted with Anthropic's token counter on 2026-11-16, from the tool list we read on 2026-11-16. Median across 28,560 counted servers: 2,657 tokens. How it is counted

How a client gets in

Connects without signing in

Read from the server's public metadata on 2026-11-16 (api.printlooper.com), in our read-only connection; no tool was called. It may have changed since. How it is read

Tool list at the three APIs

Not sent yet for this version (1.0.0).

Add to your client

Observed fact

This server accepted a session without any credential and lists 15 tools whose name or declaration suggests they change data (start_model_upload, complete_model_upload, create_listing_draft, update_listing, pause_listing and 10 more). That is our reading of the names; we did not call them. Source: our connection, 2026-11-16.

How fresh this is

Live-tested
yes, a real session (not a text-only review)
Last tested
2026-11-16
Mode
read-only (no tool calls)
Latest version
1.0.0, published 2026-11-16 (registry, as of the 2026-11-16 snapshot)
First listed version
2026-11-16 (earliest version still in the registry; older removed versions would be earlier)
Registry data
snapshot 2026-11-16
Package and repository
checked 2026-11-16
Engine
mcp-runtime-engine@0.1.0 · sdk@1.32.0

Dead or stale signals

None found in the records we hold

Looked for and not found: deprecated in the registry. Does not apply: listed version cannot be installed or is withdrawn; repository link does not open; repository archived; no push in over 365 days. Each line is a dated fact from a public record. It does not say whether the server still works, and a record can change after the date shown.

Changes since the last refresh

New in the registry: not in the list of 2026-11-15, listed on 2026-11-16 with version 1.0.0 (published 2026-11-16).

Source: the official MCP Registry list on 2026-11-15 and on 2026-11-16.

What it is

What does this server offer?

Observed inventory
42tools
1resources
4prompts

None of its 42 tools are described as changing anything. For 42 the reading was uncertain, so no mark is shown.

  • search_designson 9 other servers

    “Search the public Printlooper marketplace of 3D-printable designs by keyword or category.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    5 inputs
    • querystring“Keywords, for example "cable organizer" or "planter"”
    • categorystring“A marketplace category, if the user named one”
    • sortstring
    • limitinteger
    • offsetinteger
  • “Details of one public design from search_designs: description, size, tags, whether it needs hardware, and its page.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input, 1 required
    • design_idstringrequired
  • list_print_shops

    “Search Printlooper print shops (the makers who print and ship orders) by location, material, lead time and multicolor capability.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    6 inputs
    • querystring
    • materialstring“PLA, PETG, ABS, TPU, ...”
    • statestring“US state code”
    • max_lead_daysinteger
    • multi_colorboolean
    • limitinteger
  • get_print_shop

    “One print shop with its printers, materials and colors, and recent reviews.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input, 1 required
    • shopstringrequired“The shop id or handle from list_print_shops”
  • list_materialson 11 other servers

    “Materials, finishes, strengths and colors the Printlooper print shops offer, with how many shops offer each.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    3 inputs
    • materialstring
    • finishstring
    • color_familystring
  • how_to_order_a_print

    “How a buyer gets their own 3D model printed and shipped: the page to upload it, accepted files, and what happens next.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • stage_model_from_url

    “Download an STL or 3MF model from a public https link (a direct download, not a web page) and stage it on Printlooper, where its geometry is checked.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world yes

    3 inputs
    • urlstring“A public https link that downloads the .stl or .3mf file”
    • model_fileobject“A file the user attached, as the file object an app passes to tools.”
    • filenamestring“Name to keep, for example "planter.stl"”
  • start_model_upload

    “For agents that can read local files (Claude Code, Cursor): returns a signed URL to PUT an STL or 3MF to, with the exact headers to send.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    2 inputs, 2 required
    • filenamestringrequired“Must end in .stl or .3mf”
    • size_bytesintegerrequired
  • complete_model_upload

    “Tell Printlooper the file from start_model_upload has been uploaded, so it starts checking it.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    1 input, 1 required
    • file_idstringrequired
  • get_staged_file

    “Status of a model from stage_model_from_url or start_model_upload: processing, ready (with size in mm, grams and parts) or failed (with the reason).”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input, 1 required
    • file_idstringrequired
  • get_my_accounton 17 other servers

    “Who is connected: first name, account type (designer, seller or print shop), which permissions were granted, and where to manage the account.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • list_my_listingson 13 other servers

    “A seller's products or a designer's designs, newest first, with status and price.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    2 inputs
    • limitinteger
    • starting_afterstring
Show 30 more tools
  • list_my_orderson 9 other servers

    “Orders that earned this account money (sales, royalties, design work), newest first, with order status and earnings.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    2 inputs
    • limitinteger
    • starting_afterstring
  • get_my_earningson 2 other servers

    “Paid, pending and reversed earnings in US dollars (cents), and when the last payout was made.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • get_my_store

    “A seller's Printlooper storefront: its link, how many products are live, and whether Shopify is connected.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • get_listing_optionson 1 other server

    “For a marketplace design (from search_designs) or a staged model, quotes what print shops charge to make it, the platform fee and royalty, and the retail price that leaves a chosen margin.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    6 inputs, 1 required
    • design_idstringrequired“A design id from search_designs, or a staged model id (file_...)”
    • shopstring“Quote one print shop (id or handle).”
    • margin_percentnumber“Profit as a percent of the retail price”
    • materialstring“Quote this material, for example PLA or PETG.”
    • colorstring“Quote this color, by hex (#1A1A1A) or name.”
    • finishstring“With color: the finish to prefer when a shop has that color in more than one, for example matte or glossy”
  • create_listing_draft

    “Starts a listing from a ready staged model with the title, description, tags and price you suggest.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    8 inputs, 2 required
    • file_idstringrequired“A ready staged model id (file_...)”
    • titlestringrequired
    • descriptionstring
    • price_usdnumber“Suggested retail price for sellers”
    • tagsarray
    • shop_idstring“The print shop the user chose, as shop.id from get_listing_options”
    • materialstring“The material the user chose, for example PLA”
    • colorsarray“The colors the user chose, each as hex and finish from get_listing_options”
  • update_listingon 24 other servers

    “Change an existing listing's title, description or tags, or a seller product's price and compare-at price.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    6 inputs, 1 required
    • listing_idstringrequired
    • titlestring
    • descriptionstring
    • tagsarray
    • price_usdnumber“Seller products with a single price only”
    • compare_at_price_usdnumber or null“Strikethrough "was" price; null removes it”
  • pause_listing

    “Hide a seller product from your Printlooper storefront.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    1 input, 1 required
    • listing_idstringrequired
  • resume_listing

    “Show a seller product you hid with pause_listing on your Printlooper storefront again.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    1 input, 1 required
    • listing_idstringrequired
  • add_listing_photoson 3 other servers

    “Adds photos to one of your seller products, from public https links to PNG or JPG images (up to 10 MB each) or from images the user attached, where the app passes attached files to tools.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world yes

    3 inputs, 1 required
    • listing_idstringrequired“A seller product id from list_my_listings (prd_...)”
    • photo_urlsarray“Public https links, each downloading one PNG or JPG image (a direct link to the file, not a web page)”
    • photo_filesarray“Images the user attached, as the file objects an app passes to tools.”
  • get_marketing_kit

    “Everything needed to write social posts, ads or an email about one of your listings: title, description, price, image links, the page link with tracking for the channel, and audience notes.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    2 inputs, 1 required
    • listing_idstringrequired
    • channelstring
  • list_available_hardwareon 1 other server

    “Parts (magnets, inserts, bearings and more) that Printlooper print shops stock and have confirmed exact dimensions for, ready to build a design around on Printlooper.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    2 inputs
    • querystring“For example "magnet" or "M3 insert"”
    • limitinteger
  • preview_hardware_pocket

    “The exact openings Printlooper would cut for a confirmed part at given fit settings, before a design is made around it.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    9 inputs, 1 required
    • hardware_revision_idstringrequired“revision_id from list_available_hardware”
    • clearance_mmnumber“Gap per side around the part”
    • taper_mmnumber“Entry chamfer that helps the part go in.”
    • mountstring“pocket keeps a floor under the part; through passes straight through a panel”
    • countinteger“How many of this part”
    • columnsinteger“Parts per row along X.”
    • pitch_mmnumber“Centre-to-centre spacing.”
    • floor_hole_mmnumber“Round hole through each pocket floor, for a screw or shaft.”
    • plate_mmnumber“Panel thickness for a through cutout.”
  • get_my_shop

    “Your print shop: name, approval, capacity, daily order cap, lead time, every material with its prices and colors, and how many products of its own it sells (list them with list_my_products).”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • update_shop_profile

    “Change your shop's public description or its default lead time in days.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    2 inputs
    • descriptionstring
    • default_lead_time_daysinteger
  • set_shop_capacity

    “Pause new orders (your pending orders are rerouted to other shops and your sellers are told), resume them, or change your daily order cap.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    2 inputs
    • pausedboolean
    • daily_order_capinteger
  • set_material_prices

    “Change the prices of one of your materials (price per gram, minimum job, failure surcharge, setup and post-processing fees, lead time).”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    7 inputs, 1 required
    • material_idstringrequired
    • price_per_gram_usdnumber“For example 0.04 for 4 cents a gram”
    • min_job_price_usdnumber or null
    • failure_rate_percentnumber
    • setup_fee_usdnumber
    • post_processing_fee_usdnumber
    • lead_time_daysinteger or null
  • add_material

    “Add a material your shop prints (PLA, PETG, ABS, TPU, ASA, RESIN or NYLON) with its prices.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    8 inputs, 2 required
    • typestringrequired
    • price_per_gram_usdnumberrequired
    • min_job_price_usdnumber
    • failure_rate_percentnumber
    • setup_fee_usdnumber
    • post_processing_fee_usdnumber
    • default_finishstring“Left out, the material starts on matte, or on its first allowed finish where it has no matte (PETG)”
    • lead_time_daysinteger
  • add_material_colors

    “Add the colors (filaments) you stock for one of your materials, each with a name, a hex color and a finish.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    2 inputs, 2 required
    • material_idstringrequired
    • colorsarrayrequired
  • get_pricing_benchmarks

    “How your price per gram and minimum job compare with other approved Printlooper shops, per material (low quartile, median, high quartile).”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • estimate_job_price

    “What your shop would charge for a print of a given weight in one of your materials, with the breakdown, for one unit or a batch.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    3 inputs, 2 required
    • material_idstringrequired
    • weight_gramsnumberrequired
    • quantityinteger
  • list_my_productson 4 other servers

    “The products your print shop sells: the ones sellers list from your catalog and the ones on your own shop page.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    2 inputs
    • limitinteger
    • starting_afterstring“product_id of the last product on the previous page”
  • get_my_producton 2 other servers

    “One product from list_my_products in full: its description, tags, prices, the text printed on its insert card, where it is published, and each variant with its price and photos.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input, 1 required
    • product_idstringrequired“product_id from list_my_products”
  • add_product_photos

    “Adds photos to one variant of one of your print shop's products, from public https links to PNG or JPG images (up to 10 MB each) or from images the user attached, where the app passes attached files …”

    Publisher declares: read-only no · destructive no · idempotent no · open-world yes

    4 inputs, 1 required
    • product_idstringrequired“product_id from list_my_products”
    • variant_idstring“variant_id from get_my_product.”
    • photo_urlsarray“Public https links, each downloading one PNG or JPG image (a direct link to the file, not a web page)”
    • photo_filesarray“Images the user attached, as the file objects an app passes to tools.”
  • update_my_producton 1 other server

    “Change the title, description, tags or insert card text (material line, care instructions, warnings) of one of your print shop's products.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    7 inputs, 1 required
    • product_idstringrequired“product_id from list_my_products”
    • titlestring
    • descriptionstring“Plain text”
    • tagsarray“Replaces the tags the product has”
    • material_labelstring or null“The material line on the insert card, up to 120 characters.”
    • care_instructionsstring or null“Printed on the insert card.”
    • warningsstring or null“Printed on the insert card.”
  • preview_catalog_importon 1 other server

    “Checks rows from your spreadsheet before importing them as your own products (sold to Printlooper sellers): which rows have problems, how many products and variants it makes, and whether your plan ha…”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input, 1 required
    • rowsarrayrequired
  • import_catalogon 1 other server

    “Imports rows from your spreadsheet as your own products, published to Printlooper sellers.”

    Publisher declares: read-only no · destructive yes · idempotent no · open-world no

    2 inputs, 2 required
    • rowsarrayrequired
    • confirmbooleanrequired
  • list_open_jobson 8 other servers

    “Print jobs assigned to your shop that are not shipped yet, oldest first, with status, quantity and deadline.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input
    • limitinteger
  • list_my_hardware

    “Hardware your shop stocks (magnets, inserts, screws and more), with stock, price, whether you confirmed its exact dimensions, and whether designers are offered it (with the reason when they are not).”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    Takes no inputs.

  • draft_hardware_from_datasheet

    “Reads a part's datasheet (a public https link, or pasted text) and drafts its catalog entry and exact dimensions.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world yes

    2 inputs
    • urlstring
    • textstring
  • confirm_hardware_dimensions

    “Records your shop’s confirmation of the exact part and dimensions you stock, so designers can build parts around it.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    9 inputs, 8 required
    • offering_idstringrequired“offering_id from list_my_hardware”
    • part_numberstringrequired
    • shapestringrequired
    • width_mmnumberrequired“Diameter for a round part, across flats for a hexagonal part”
    • depth_mmnumberrequired“Same as width for a round or hexagonal part”
    • height_mmnumberrequired
    • tolerance_mmnumberrequired
    • source_urlstring
    • evidencestringrequired“The datasheet lines, or how and with what it was measured”

Each quoted sentence is the first sentence of the publisher’s own description. The kind of tool and the “changes data” mark are our AI model’s reading of that description, not something we tested: two differently worded runs had to agree, otherwise no label is shown, and nobody has checked them by hand. A tool without the “changes data” mark is described as only reading, searching or calculating, or the two runs did not agree. No tool was called. Read the publisher’s full description before relying on it. “Publisher declares” lists the hints the server itself sends with the tool (MCP annotations: read-only, destructive, idempotent, open-world); they are the publisher's claims, not checked by us. Inputs are the parameters in the tool's own input schema: name, declared type, whether it is required, and the first sentence of its description. Read 2026-11-16.

How well are its tools described?

Features #4 and #5

How clearly this server's own tool descriptions say what a tool does, and how consistent its tool list is. The first part is an AI model's yes/no reading of each description; the second part is counted. We do not turn it into a grade.

Descriptions

AI reading of each description

No AI reading was available for this server's tools (the two runs did not agree, or the listing was not reviewed).

Counted from the listing

Parameters with a description
45% of 118
Tools with a description
100% of 42
Typical description length
264 characters

The tool set

Counted from the listing

Tools
42
Size of the list
about 11,144 tokens for an agent to load (characters ÷ 4)
Naming
42 of 42 names use snake_case

AI reading: easy to mix up

No pair found.

The AI items cover 0 of 42 tools: for a tool where two differently worded runs disagreed, that item is left out. They were not checked by hand, and no tool was called. “Easy to mix up” means two tools whose names or descriptions overlap without saying how they differ; the AI found none, comparing tools within groups of 40. We do not rate whether the tool set is complete or whether side effects are spelled out, because our AI reading of those was not reliable enough.

How do I add it to my client?

Config from the registry entry

From the remote endpoint (Streamable HTTP)

We connected to this URL on 2026-11-16 (a read-only session: no tool was called).

Add to CursorAn install link in the format Cursor documents, holding the Cursor config below.

Claude Desktop or claude.ai
Settings → Connectors → Add custom connector, then paste:
https://api.printlooper.com/mcp
Cursor · .cursor/mcp.json in a project, or ~/.cursor/mcp.json
{
  "mcpServers": {
    "printlooper": {
      "url": "https://api.printlooper.com/mcp"
    }
  }
}
VS Code · .vscode/mcp.json
{
  "servers": {
    "printlooper": {
      "type": "http",
      "url": "https://api.printlooper.com/mcp"
    }
  }
}
VS Code (command line) · Bash or zsh terminal (macOS, Linux)
code --add-mcp '{"name":"printlooper","type":"http","url":"https://api.printlooper.com/mcp"}'
Claude Code
claude mcp add --transport http printlooper https://api.printlooper.com/mcp
Cline · cline_mcp_settings.json (Cline CLI: ~/.cline/data/settings/; in the editor: MCP Servers → Configure → Configure MCP Servers)
{
  "mcpServers": {
    "printlooper": {
      "type": "streamableHttp",
      "url": "https://api.printlooper.com/mcp",
      "disabled": false,
      "autoApprove": []
    }
  }
}
Gemini CLI · ~/.gemini/settings.json, or .gemini/settings.json in a project
{
  "mcpServers": {
    "printlooper": {
      "httpUrl": "https://api.printlooper.com/mcp"
    }
  }
}
OpenAI Codex · ~/.codex/config.toml, or .codex/config.toml in a trusted project
[mcp_servers.printlooper]
url = "https://api.printlooper.com/mcp"
Zed · Zed settings file (command: zed: open settings file)
{
  "context_servers": {
    "printlooper": {
      "url": "https://api.printlooper.com/mcp"
    }
  }
}
Try it in the MCP Inspector · runs on your machine, opens in your browser · Node 22.19+
npx @modelcontextprotocol/inspector@2.11.0 --server-url https://api.printlooper.com/mcp --transport http
  • The server runs on the operator's infrastructure; it may ask you to sign in when you first connect.
  • Zed's docs we read on 2026-10-26 describe remote servers by URL and do not name the transport.
  • The MCP Inspector lists the server's tools, resources and prompts; a tool you call there runs for real.

Built from the server's registry entry with each client's documented format (checked 2026-10-14; the Cursor link and the VS Code command 2026-10-19; the MCP Inspector command 2026-10-21; Cline, Gemini CLI, OpenAI Codex and Zed 2026-10-26). Values in < > are yours to fill in; this page never contains a key. Where the server needs a setting the entry does not declare, it can still fail to start.

What do the published files and outside lists say?

Read as text · nothing run · no tool called

Package files

  • MCP SDK in the package files. Not read yet: added with the next daily run.
  • Build workflow. Not read yet: added with the next daily run.

Outside lists

  • CVE records (NVD). No CVE record in the NVD feeds we read links this server's repository. Source: read 2026-11-16. This product uses the NVD API but is not endorsed or certified by the NVD.
  • GitHub advisories. No GitHub advisory names this entry's listed package. Source: read 2026-11-16. GitHub Advisory Database, CC BY 4.0
  • Docker MCP catalogue. Not in the Docker MCP catalogue on 2026-11-16. Source: read 2026-11-16.
  • Cline marketplace. Not in the Cline marketplace on 2026-11-16. Source: read 2026-11-16.

Own host

  • security.txt. No security.txt at https://api.printlooper.com/.well-known/ (HTTP 404, 2026-11-16). No security.txt at https://printlooper.com/.well-known/ (HTTP 404, 2026-11-16). Source: api.printlooper.com/.well-known/security.txt · read 2026-11-16.
  • A2A agent card. No A2A agent card at https://api.printlooper.com/.well-known/ (HTTP 404, 2026-11-16). No A2A agent card at https://printlooper.com/.well-known/ (HTTP 404, 2026-11-16). Source: api.printlooper.com/.well-known/agent-card.json · read 2026-11-16.

Read as text from published files and outside lists. Nothing was installed or run, and no tool was called. A fact, not a rating. How each fact is read

Does the registry listing match what we found?

Feature #6

The registry checks an entry when it is published (each new version), and nothing re-checks it on a schedule. A difference below is about the listing, not a judgement of the publisher.

Registry saysWe foundResultSource · date
Remote endpoint api.printlooper.com/mcpSession openedmatchesour test · 2026-11-16
No credential declared as requiredOpened a session without any credentialmatchesour test · 2026-11-16

Choosing

Record checks

Public records · not a safety rating

1 of 2 record checks met · 7 do not apply

  • Not ranked by downloads: a remote server publishes no download figure
  • Not ranked by stars: no public GitHub repository
  • MetRegistry entry is active and says how to run itActive, with a package or a remote address.
  • Not metSource repository link opensThe registry entry gives no repository link.What changes this check: This check opens the repository link in the registry entry. GitHub's documentation describes changing a repository's visibility in its Settings, under Danger Zone, Change visibility. GitHub: setting repository visibility
  • Does not applyRepository is not archivedNo public GitHub repository to read.
  • Does not applyCode pushed to the repository in the 90 days before our checkNo public GitHub repository to read.
  • Does not applyRepository publishes a security policy (SECURITY.md)No public GitHub repository to read.
  • Does not applyPackage names its licence with a standard (SPDX) identifierRemote server: it ships no package.
  • Does not applyThe version the registry lists can be installed and is not withdrawnRemote server: it ships no package.
  • Does not applynpm package carries build provenance (attestation)Remote server: it ships no package.
  • Does not applyNo known critical or high advisory in the package or its dependenciesRemote server: it ships no package.

Read from public records only: the registry entry, npm/PyPI, GitHub and advisory databases, checked 2026-11-16. No tool was called. Only “met” and “not met” are counted, so the total differs between servers; a check that does not apply or that we could not run is listed, never counted against it. It is not a safety rating, and the same rules apply to every server. How each check works · Leaderboards · How we stay neutral

Common questions about com.printlooper/printlooper

Answered from the data above

Who publishes com.printlooper/printlooper?

The registry ties the namespace com.printlooper to the domain printlooper.com; only its owner can publish under it. These are facts from the registry and GitHub, not a rating.

Does com.printlooper/printlooper need an API key or sign-in?

It opened a session without any credential on 2026-11-16. The registry entry declares no required credential; no declaration is not a guarantee.

Has com.printlooper/printlooper been security tested?

Partly. 5 of the 16 checks that apply to it were exercised. It accepted a session without any credential and lists tools whose names suggest they change data. We did not call them. ProtocolProbe publishes no security verdict for a named server.

Found this page useful?

Anonymous · no sign-in

A quick, anonymous reaction — no account, no email. One per kind from your browser. The tally updates when the page is next refreshed, and it is only a rough count, never a safety rating or a measured number of people.

Compare with another server

Side by side: registry entry, our read-only session, the tools and the 18 classification fields. Same values as each page; no score.

Security testing

What did we test, and what did we leave out?

18 checks · features #1, #2

Open without sign-in

It accepted a session without any credential and lists tools whose names suggest they change data. We did not call them. No security score is given; a check we did not run is never counted as passed.

The 18 checks at a glanceour test · 2026-11-16
  1. Inventory: exercised
  2. Hidden instructions: exercised
  3. Real execution: not run · our policy
  4. Secret leak: not run · nothing to check it against
  5. Internal addresses: not run · our policy
  6. Unconfirmed changes: not run · our policy
  7. Bad input: not run · our policy
  8. Model requests: not run · nothing to check it against
  9. Sensitive questions: not run · nothing to check it against
  10. Folder boundary: not run · our policy
  11. Log leaks: not run · nothing to check it against
  12. Hidden content: exercised
  13. Fake assistant turns: exercised
  14. Token passthrough: not applicable
  15. Token audience: not applicable
  16. Sign-in redirect: not run · our policy
  17. Consent handling: not testable from outside
  18. Sign-in metadata: exercised

5 exercised11 not run (reason given)2 not applicable

Each check ends in exactly one state: exercised, not run (with the reason), or not applicable (with the reason). 5 of the 16 checks that apply to it were exercised. We do not publish security-check outcomes for named servers. These 18 checks are separate from the record checks at the top of this page, which read public records only.

Exercised · 5
  • 1Inventory
    tool-list
    Reads the declared tools, resources and prompts.exercised
  • 2Hidden instructions
    description-poisoning
    Looks for hidden instructions in tool descriptions.exercised
  • 12Hidden content
    audience-hiding
    Checks resources that hide content from the user.exercised
  • 13Fake assistant turns
    fake-assistant-turn
    Checks prompts that pose as the assistant's own words.exercised
  • 18Sign-in metadata
    oauth-url-scheme
    Checks the published sign-in metadata for unsafe URLs.exercised
Not run, with the reason · 11
  • 3Real execution
    real-execution
    Calls a tool and checks what really happens.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 4Secret leak
    canary-leak
    Plants a fake secret and checks whether it leaks.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 5Internal addresses
    ssrf
    Checks whether a tool can be steered to internal addresses.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 6Unconfirmed changes
    write-without-confirmation
    Checks whether tools that change data act without asking.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 7Bad input
    error-handling
    Sends bad input and watches how the server answers.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 8Model requests
    sampling
    Checks whether the server asks the client's model to act for it.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 9Sensitive questions
    elicitation-sensitive-data
    Checks whether the server asks users for sensitive data.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 10Folder boundary
    root-boundary
    Checks whether the server reaches outside the folders it was given.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 11Log leaks
    logging-side-channel
    Checks whether log messages carry data they should not.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 16Sign-in redirect
    open-redirect
    Checks the sign-in redirect for abuse.Testing the sign-in redirect means sending probes to the operator's sign-in service, which we do not do.not run · our policy
  • 17Consent handling
    confused-deputy
    Checks consent handling when one service acts for another.Depends on the operator's own consent screen, which differs per server and cannot be tested from outside.not testable from outside
Does not apply to this server · 2
  • 14Token passthrough
    token-passthrough
    Checks whether the server forwards a user's token to other services.The server opened a session without sign-in, so there is no token flow to check.not applicable
  • 15Token audience
    token-audience-validation
    Checks whether tokens meant for another service are accepted.The server opened a session without sign-in, so there is no token flow to check.not applicable

Source: our own test, 2026-11-16, mcp-runtime-engine@0.1.0. Which checks count and why follows our published scoring model.

What happened during the test?

Feature #8

The steps in order, as the test record holds them.

  1. 0 msStarted a read-only session with the server's remote endpoint
  2. 1,647 msConnected after 0 redirects. No credential was sent or needed.
  3. Read the inventory: 42 tools, 1 resource, 4 prompts.
  4. 9,342 msFinished: 5 checks exercised.

Reference

How is it classified?

18 fields

One value per field, each with its source. Fields written by AI models are marked. A field with no value says why.

TopicAI-classified
pending: added at the next monthly refresh
listed 2026-11-16; not classified yet
Pricing modelAI-classified
pending: added at the next monthly refresh
the website is not read yet
Programming language
does not apply
no existing GitHub repository (server declares no repository link, so there is nothing to fetch)
Hosting type
registry · 2026-11-16
MCP capability
prompts, resources, tools
our test · 2026-11-16
Transport
streamable HTTP
registry · 2026-11-16
Required credentials
none declared
registry · 2026-11-16 · no declaration is not a guarantee
Package registry
does not apply
remote-only server: no package is shipped, so there is no package registry
Freshness
0–30 days
registry updatedAt · 2026-11-16
Lifecycle status
registry · 2026-11-16
License class
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Integrity hash
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Signature / provenance
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Dependency advisories
does not apply
ships no package, so there are no dependencies to audit
Popularity
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Publisher signals
not stated
no readable GitHub owner to describe
Maintenance
does not apply
server declares no repository link, so there is nothing to fetch
Environment
the publisher's infrastructure
where it runs, from the hosting type · 2026-11-16

“Not stated” means the source did not state it; “does not apply” means it does not apply to this kind of server; “our limit” means our own lookup failed. A linked value opens the directory filtered to the same value.

Cite or correct this page

Sources and corrections

Suggested citation

ProtocolProbe. “com.printlooper/printlooper: MCP server record.” Data checked 2026-11-16. https://protocolprobe.com/mcp/servers/com.printlooper/printlooper

Figures are valid for the date shown. Our facts on this page are CC BY 4.0: reuse them with a link and the check date. Quoted text (the publisher’s descriptions, website quotes, tool names) is not ours to license.

As JSON: this record in the API · API documentation.

Badge for your README

ProtocolProbe: 1 of 2 record checks met

[![ProtocolProbe](https://protocolprobe.com/api/v1/badge/com.printlooper/printlooper)](https://protocolprobe.com/mcp/servers/com.printlooper/printlooper)

It shows this server's record-check count: facts from public records, no tool called. It is not a security rating or a pass. It links here and updates after each data reload.

Something wrong, or is this yours?

If a fact here is wrong, tell us and we will re-check it. If you operate this server, you can run our checks on it yourself with the free self-test command; we call no server’s tools ourselves for anything shown here, except for a server whose operator has claimed it and given permission (that server's page says so).

Write to hello@protocolprobe.com · corrections log · methodology