Skip to content

MCP servers › io.github.Red-Center-Studio › nocode-migrator

MCP server · registry snapshot 2026-11-18 · last tested 2026-11-18

nocode-migrator MCP server

Registry name io.github.Red-Center-Studio/nocode-migrator

Bubble to Cloudflare App & Data Migrator — the publisher's title

by Red-Center-Studio · GitHub account (the registry's namespace rule)repository: same ownerSource ↗Website ↗

Move a Bubble® app's UI, backend, D1 data, and R2 files to your Cloudflare account. Free preview. — the publisher's description

4 of 5 record checks metRead-only · tools listed 2026-11-18version 0.4.0streamable HTTP22 tools

Summary

io.github.Red-Center-Studio/nocode-migrator is a remote MCP server listed in the official MCP registry at version 0.4.0, under the namespace of the GitHub account Red-Center-Studio. Its linked repository, github.com/Red-Center-Studio/claude-connectors, belongs to the same GitHub account. On 2026-11-18 ProtocolProbe connected to it in read-only mode and read its inventory: 22 tools, 0 resources and 0 prompts.

Record checks

4 of 5 record checks met · 4 do not apply

  • met: Registry entry is active and says how to run it
  • met: Source repository link opens
  • met: Repository is not archived
  • met: Code pushed to the repository in the 90 days before our check
  • not met: Repository publishes a security policy (SECURITY.md)
  • not applicable: Package names its licence with a standard (SPDX) identifier
  • not applicable: The version the registry lists can be installed and is not withdrawn
  • not applicable: npm package carries build provenance (attestation)
  • not applicable: No known critical or high advisory in the package or its dependencies
  • Not ranked by downloads: a remote server publishes no download figure
  • Not ranked by stars: 0 stars (ranked from 10)

From public records, not a safety rating. Each check with its reason · Is it safe to install?

Operate this server? Correct a fact · README badge · Run the checks yourself · Claim it

Key facts

Runs
remote (hosted by the publisher)
Transport
streamable HTTP
Your own values
none declared (not a guarantee)
Sign-in
none needed to open a session
Repository
public
Tools
22
Last tested
2026-11-18

Tool list size

14,732 tokens on Claude Opus 5.5

Added to every request that loads this server's tools (22 tools). Counted with Anthropic's token counter on 2026-11-18, from the tool list we read on 2026-11-18. Median across 28,560 counted servers: 2,657 tokens. How it is counted

How a client gets in

Connects without signing in

Read from the server's public metadata on 2026-11-18 (nc.redcenterstudio.com), in our read-only connection; no tool was called. It may have changed since. How it is read

Tool list at the three APIs

Not sent yet for this version (0.4.0).

Add to your client

Observed fact

This server accepted a session without any credential and lists 4 tools whose name or declaration suggests they change data (nc_forget, nc_load, nc_cutover, nc_move). That is our reading of the names; we did not call them. Source: our connection, 2026-11-18.

How fresh this is

Live-tested
yes, a real session (not a text-only review)
Last tested
2026-11-18
Mode
read-only (no tool calls)
Latest version
0.4.0, published 2026-11-18 (registry, as of the 2026-11-18 snapshot)
First listed version
2026-11-16 (earliest version still in the registry; older removed versions would be earlier)
Version history
2 versions listed, 2026-11-16 to 2026-11-18; 2 in the 90 days before the 2026-11-18 snapshot.
Most recent 2 versions
  • 0.4.0 · 2026-11-18
  • 0.3.0 · 2026-11-16
(versions still listed in the registry only)
Registry data
snapshot 2026-11-18
Package and repository
checked 2026-11-18
Engine
mcp-runtime-engine@0.1.0 · sdk@1.32.0

Dead or stale signals

None found in the records we hold

Looked for and not found: deprecated in the registry; repository link does not open; repository archived; no push in over 365 days. Does not apply: listed version cannot be installed or is withdrawn. Each line is a dated fact from a public record. It does not say whether the server still works, and a record can change after the date shown.

Changes since the last refresh

Version 0.3.0 (published 2026-11-16) → 0.4.0 (published 2026-11-18), between the registry lists of 2026-11-17 and 2026-11-18.

The publisher published no GitHub release note for this version: its repository publishes no GitHub releases.

Source: the official MCP Registry list on 2026-11-17 and on 2026-11-18; release notes from the GitHub Releases API, checked 2026-11-18.

What it is

What does this server offer?

Observed inventory
22tools
0resources
0prompts

None of its 22 tools are described as changing anything. For 22 the reading was uncertain, so no mark is shown.

  • nc_ping

    “Works without an API key.”

    Publisher declares: read-only yes · open-world no

    Takes no inputs.

  • nc_audit

    “Read-only inventory of a Bubble® app before moving its data to Cloudflare D1 and R2: data types, fields, relations, option sets, record counts, types the Data API does not expose, and a risk list wit…”

    Publisher declares: read-only yes · open-world yes

    8 inputs, 2 required
    • job_idstring“A job from nc_connect: its sealed Data API token and uploaded catalog are used.”
    • sourcestringrequired“The source platform.”
    • app_base_urlstringrequired“The app's address, for example https://yourapp.bubbleapps.io or its custom domain.”
    • data_api_tokenstring“A Data API token from the app's Settings > API.”
    • versionstring“Which database to count.”
    • app_specobject“app-spec.json from the nocode-migration-audit plugin (spec version 0.1).”
    • editor_catalogobject“The output of the Bubble MCP list_types tool, used for the schema when there is no app_spec.”
    • detailstring“Apps with more than 30 types get a summary of the biggest types by default.”
  • nc_plan

    “Mapping plan for a job from nc_audit: one D1 table per data type (wide types split into linked tables, lists as join tables), a SQL preview of the first three tables, slim-down suggestions (empty typ…”

    Publisher declares: read-only yes · open-world no

    6 inputs, 1 required
    • job_idstringrequired“The job_id from nc_audit.”
    • id_strategystring“Primary keys keep the source's unique ids (the only option in v1).”
    • primitive_listsstring“Lists of text or numbers as a JSON column (default) or a join table.”
    • skip_typesarray“Data type keys to leave out, as agreed with the owner.”
    • skip_fieldsarray“Fields to leave out, as type.field.”
    • detailstring“Plans with more than 30 tables list the biggest by default.”
  • nc_connect

    “Returns a one-time link to a page on this server where the owner types the Cloudflare token, the R2 keys and the source app's Data API token, and can upload the editor catalog file.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    4 inputs
    • app_base_urlstring“The source app's address, for a new job.”
    • versionstring“Which database: live (default) or test.”
    • job_idstring“An existing job, to add or replace its tokens.”
    • purposestring“tokens (default): the page for the Cloudflare, R2 and Data API tokens.”
  • nc_compile_plan

    “Reads the app file the owner uploaded (nc_connect with purpose export) and returns a move score from 0 to 100, how ready each page is, a plain-words list of what needs a person, what moves by itself,…”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world no

    3 inputs, 1 required
    • job_idstringrequired“The job_id from nc_connect.”
    • detailstring“summary (default) lists the 10 pages that need the most attention.”
    • refreshboolean“Compute again even if nothing changed.”
  • nc_changes

    “Queues, lists, removes or clears changes the owner wants made during the move: rename or drop a data type or field, add a field, drop a page, change a list of choices, swap the email provider or appl…”

    Publisher declares: read-only no · destructive no · idempotent no · open-world no

    4 inputs, 2 required
    • job_idstringrequired“The job_id from nc_connect.”
    • actionstringrequired
    • changeobject“For add.”
    • change_idstring“For remove.”
  • nc_forget

    “Deletes the app file the owner uploaded and the plan built from it.”

    Publisher declares: read-only no · destructive yes · idempotent yes · open-world no

    2 inputs, 1 required
    • job_idstringrequired“The job_id from nc_connect.”
    • whatstring“export (default): the uploaded file and the plan.”
  • nc_basket

    “The basket for finishing the move.”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world no

    4 inputs, 2 required
    • job_idstringrequired“The job_id from nc_connect.”
    • actionstringrequired“list, switch one item on or off, or reset every switch to its starting position (add-ons off, queued changes on).”
    • itemstring“For switch: an add-on id from list, or a change_id from nc_changes.”
    • onboolean“For switch: true to include it, false to leave it out.”
  • nc_finalise_quote

    “Shows exactly what finalising this app costs: the tier for its page count (the matching data move is included), the 20% extra-app discount (never more than the app's build cost) when this account fin…”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    2 inputs, 1 required
    • job_idstringrequired“The job_id from nc_connect.”
    • modestring“automatic (default): every page rebuilt and deployed.”
  • nc_schema

    “Generates numbered D1 migration SQL files and a Drizzle schema from the agreed plan (nc_plan), and writes them to the customer's R2 under nc/<job>/schema/.”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    11 inputs, 1 required
    • job_idstringrequired
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • database_namestring“Name of the D1 database to create or reuse, for example nc-sharehousehub-staging.”
    • applyboolean“Create the database and run the migrations.”
    • max_statementsnumber“Statements to run per call when applying.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_export

    “Pages through the source app's records (read only) into NDJSON objects in the customer's R2 bucket.”

    Publisher declares: read-only no · destructive no · idempotent no · open-world yes

    14 inputs, 1 required
    • job_idstringrequired
    • typesarray“Data type keys to export.”
    • sincestring“ISO date.”
    • max_requests_per_minutenumber“Throttle for the source app.”
    • max_pagesnumber“Pages of up to 100 records per call.”
    • reexportboolean“Export everything again even though a finished run exists.”
    • data_api_tokenstring“The source app's Data API token.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_load

    “Loads the staged records into the customer's D1 database by upsert on id.”

    Publisher declares: read-only no · destructive yes · idempotent yes · open-world yes

    14 inputs, 1 required
    • job_idstringrequired
    • typesarray“Data type keys to load.”
    • modestring“Upsert by id (the only mode in v1).”
    • truncate_firstboolean“Empty the target tables before loading.”
    • confirm_overwriteboolean“Confirms that existing rows in the target may be overwritten or removed.”
    • reprocessboolean“Run every staged object again, for example after a schema change.”
    • max_requestsnumber“D1 queries per call.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
Show 10 more tools
  • nc_files

    “Copies every file and image the loaded data points at from the source's storage into the customer's R2 bucket, stored under its content hash (the same file is stored once).”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    16 inputs, 1 required
    • job_idstringrequired
    • bucketstring“R2 bucket for the files.”
    • rewriteboolean“Fill the key columns once a file is copied.”
    • rewrite_textboolean“Also replace links inside text values with url_prefix plus the new key.”
    • url_prefixstring“Prefix for rewritten text links.”
    • allow_hostsarray“Extra hosts to copy from, for example images.example.com.”
    • retry_failedboolean“Try again the files that failed or were skipped earlier.”
    • max_filesnumber“Files per call.”
    • max_bytesnumber“Largest file to copy.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_users

    “Turns the loaded users into login identities (email, created date, and the verified flag as exported) and writes the recipient list to the customer's R2.”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    9 inputs, 1 required
    • job_idstringrequired
    • strategystring“How users sign in the first time.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_access

    “Converts the app's privacy rules into policy.ts (per-table read and write rules, default deny) and a generated test file with allow and deny cases.”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    10 inputs, 1 required
    • job_idstringrequired
    • app_specobject“app-spec.json from the nocode-migration-audit plugin.”
    • inlineboolean“Return the file contents in the reply as well as writing them to R2.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_verify

    “Checks the loaded data and says pass or fail: row counts per type against the source's count now, a checksum sample (default 500 records per type, sha256 of the canonical JSON of the mapped columns, …”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    15 inputs, 1 required
    • job_idstringrequired
    • samplenumber“Records to checksum per type.”
    • typesarray“Data type keys to verify.”
    • accept_unmapped_filesboolean“Accept that some rows keep a source file URL with no copy (links to other hosts, files that could not be copied).”
    • skip_sourceboolean“Do not count the source's records (no token).”
    • max_costnumber“Work per call.”
    • restartboolean“Start a new verification instead of continuing the open one.”
    • data_api_tokenstring“The source app's Data API token, if it is not held for this job any more.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_redirects

    “Builds redirects.json (301s from old Bubble® paths and query forms to the new routes), a redirects.ts module for the new Worker, an _redirects file for exact paths, and a curl script that tests every…”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    15 inputs, 1 required
    • job_idstringrequired
    • sitemap_urlstring“The old app's sitemap.xml (a sitemap index is followed).”
    • url_listarray“Old URLs, absolute or paths.”
    • page_routesobject“Old page key to its new route.”
    • page_typesobject“Old page key to the data type it shows, when the name does not say.”
    • id_slug_mapobject“{ type: { bubble id: slug } }.”
    • new_basestring“Origin of the new app for the expected Location, for example https://www.example.com.”
    • app_specobject“app-spec.json, for the page list.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_cutover

    “Refuses to run unless the last nc_verify passed and nothing was exported, loaded, copied or imported after it.”

    Publisher declares: read-only no · destructive yes · idempotent yes · open-world yes

    11 inputs, 1 required
    • job_idstringrequired
    • domainstring“The address users visit, for example www.example.com.”
    • completeboolean“Record that the move is done.”
    • confirm_cutoverboolean“Needed with complete: confirms DNS has moved and credentials may be deleted.”
    • cf_account_idstring“The customer's Cloudflare account id.”
    • cf_api_tokenstring“A Cloudflare API token with D1 edit permission on that account.”
    • r2_bucketstring“An R2 bucket in that account, for staging and schema files.”
    • r2_access_key_idstring“Access key id of an R2 API token that can read and write that bucket.”
    • r2_secret_access_keystring“Its secret.”
    • go_aheadboolean“Set true only when a charge applies, once the owner has seen the estimate and agreed to it.”
    • upgradeboolean“Set true to pay the difference to the next pass that fits, only when the app is past its pass's (or free trial's) record or file limit.”
  • nc_account

    “Free, and works without an API key: with no key it says what is free, what the free trial covers and what each pass costs; with a key it shows the credit balance, the passes paid for (which app, unti…”

    Publisher declares: read-only yes · open-world no

    Takes no inputs.

  • nc_preview

    “Starts the app's free preview: up to 3 pages the owner picks (default: the home page and the two largest pages) are rebuilt from the uploaded app file as React pages on sample data, then checked and …”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world no

    2 inputs, 1 required
    • job_idstringrequired“The job_id from nc_connect.”
    • pagesarray“Names of up to 3 pages, as listed by nc_compile_plan with detail full.”
  • nc_preview_status

    “Shows how the free preview is going: each page's state, its automatic score (visible text, working buttons, data fields, phone width), what it cost, and when the preview is deleted.”

    Publisher declares: read-only yes · destructive no · idempotent yes · open-world no

    1 input, 1 required
    • job_idstringrequired“The job_id from nc_connect.”
  • nc_move

    “Walks a non-technical owner through the whole move of a Bubble® app to their own Cloudflare account as a checklist that is saved on the job: free audit and plan, a secure page for tokens (never typed…”

    Publisher declares: read-only no · destructive no · idempotent yes · open-world yes

    17 inputs
    • job_idstring“Carry on with this move (the job_id from the first call).”
    • app_base_urlstring“Start a new move for this app address, for example https://yourapp.bubbleapps.io.”
    • versionstring“Which database to read when starting.”
    • add_onsarray“Extras to switch on (their ids from the list shown at the choose-extras step).”
    • remove_add_onsarray“Extras to switch off.”
    • confirm_add_onsboolean“The owner has chosen their extras (or none) and is ready to see the exact price.”
    • confirm_price_usdnumber“The exact total in USD, as shown, once the owner has agreed to it.”
    • skip_previewboolean“Leave out the free preview.”
    • preview_add_onsarray“Extras whose demo is built by the model from the preview pages: mobile, ai_assistant, or the id of a described change.”
    • rebuild_pagesarray“Pages that are not right, each with a short note that goes to the builder as extra instructions.”
    • pages_okboolean“The owner has looked at the built pages and wants to go on (asked only when the server is set to stop for a look).”
    • domainstring“The address the owner's visitors use, for example www.example.com.”
    • sitemap_urlstring“The old app's sitemap, for the redirect list at the go-live step.”
    • confirm_go_liveboolean“The owner has made the final address switch themselves.”
    • close_jobboolean“After go-live: delete the tokens saved for this job and close it.”
    • new_linkboolean“Make a fresh secure link even if the last one is still valid (for example when it was lost).”
    • app_specobject“app-spec.json from the audit plugin, instead of uploading the catalog.”

Each quoted sentence is the first sentence of the publisher’s own description. The kind of tool and the “changes data” mark are our AI model’s reading of that description, not something we tested: two differently worded runs had to agree, otherwise no label is shown, and nobody has checked them by hand. A tool without the “changes data” mark is described as only reading, searching or calculating, or the two runs did not agree. No tool was called. Read the publisher’s full description before relying on it. “Publisher declares” lists the hints the server itself sends with the tool (MCP annotations: read-only, destructive, idempotent, open-world); they are the publisher's claims, not checked by us. Inputs are the parameters in the tool's own input schema: name, declared type, whether it is required, and the first sentence of its description. Read 2026-11-18.

How well are its tools described?

Features #4 and #5

How clearly this server's own tool descriptions say what a tool does, and how consistent its tool list is. The first part is an AI model's yes/no reading of each description; the second part is counted. We do not turn it into a grade.

Descriptions

AI reading of each description

No AI reading was available for this server's tools (the two runs did not agree, or the listing was not reviewed).

Counted from the listing

Parameters with a description
94% of 168
Tools with a description
100% of 22
Typical description length
483 characters

The tool set

Counted from the listing

Tools
22
Size of the list
about 10,988 tokens for an agent to load (characters ÷ 4)
Naming
22 of 22 names use snake_case

AI reading: easy to mix up

No pair found.

The AI items cover 0 of 22 tools: for a tool where two differently worded runs disagreed, that item is left out. They were not checked by hand, and no tool was called. “Easy to mix up” means two tools whose names or descriptions overlap without saying how they differ; the AI found none. We do not rate whether the tool set is complete or whether side effects are spelled out, because our AI reading of those was not reliable enough.

How do I add it to my client?

Config from the registry entry

From the remote endpoint (Streamable HTTP)

We connected to this URL on 2026-11-18 (a read-only session: no tool was called).

Add to CursorAn install link in the format Cursor documents, holding the Cursor config below.

Claude Desktop or claude.ai
Settings → Connectors → Add custom connector, then paste:
https://nc.redcenterstudio.com/mcp
Cursor · .cursor/mcp.json in a project, or ~/.cursor/mcp.json
{
  "mcpServers": {
    "nocode-migrator": {
      "url": "https://nc.redcenterstudio.com/mcp"
    }
  }
}
VS Code · .vscode/mcp.json
{
  "servers": {
    "nocode-migrator": {
      "type": "http",
      "url": "https://nc.redcenterstudio.com/mcp"
    }
  }
}
VS Code (command line) · Bash or zsh terminal (macOS, Linux)
code --add-mcp '{"name":"nocode-migrator","type":"http","url":"https://nc.redcenterstudio.com/mcp"}'
Claude Code
claude mcp add --transport http nocode-migrator https://nc.redcenterstudio.com/mcp
Cline · cline_mcp_settings.json (Cline CLI: ~/.cline/data/settings/; in the editor: MCP Servers → Configure → Configure MCP Servers)
{
  "mcpServers": {
    "nocode-migrator": {
      "type": "streamableHttp",
      "url": "https://nc.redcenterstudio.com/mcp",
      "disabled": false,
      "autoApprove": []
    }
  }
}
Gemini CLI · ~/.gemini/settings.json, or .gemini/settings.json in a project
{
  "mcpServers": {
    "nocode-migrator": {
      "httpUrl": "https://nc.redcenterstudio.com/mcp"
    }
  }
}
OpenAI Codex · ~/.codex/config.toml, or .codex/config.toml in a trusted project
[mcp_servers.nocode-migrator]
url = "https://nc.redcenterstudio.com/mcp"
Zed · Zed settings file (command: zed: open settings file)
{
  "context_servers": {
    "nocode-migrator": {
      "url": "https://nc.redcenterstudio.com/mcp"
    }
  }
}
Try it in the MCP Inspector · runs on your machine, opens in your browser · Node 22.19+
npx @modelcontextprotocol/inspector@2.11.0 --server-url https://nc.redcenterstudio.com/mcp --transport http
  • Optional settings the entry also lists (left out above): Authorization.
  • The server runs on the operator's infrastructure; it may ask you to sign in when you first connect.
  • Zed's docs we read on 2026-10-26 describe remote servers by URL and do not name the transport.
  • The MCP Inspector lists the server's tools, resources and prompts; a tool you call there runs for real.

Built from the server's registry entry with each client's documented format (checked 2026-10-14; the Cursor link and the VS Code command 2026-10-19; the MCP Inspector command 2026-10-21; Cline, Gemini CLI, OpenAI Codex and Zed 2026-10-26). Values in < > are yours to fill in; this page never contains a key. Where the server needs a setting the entry does not declare, it can still fail to start.

What do the published files and outside lists say?

Read as text · nothing run · no tool called

Package files

  • MCP SDK in the package files. Not read yet: added with the next daily run.
  • Build workflow. Not read yet: added with the next daily run.

Outside lists

  • CVE records (NVD). No CVE record in the NVD feeds we read links this server's repository. Source: read 2026-11-18. This product uses the NVD API but is not endorsed or certified by the NVD.
  • GitHub advisories. No GitHub advisory names this entry's listed package. Source: read 2026-11-18. GitHub Advisory Database, CC BY 4.0
  • Docker MCP catalogue. Not in the Docker MCP catalogue on 2026-11-18. Source: read 2026-11-18.
  • Cline marketplace. Not in the Cline marketplace on 2026-11-18. Source: read 2026-11-18.

Own host

  • security.txt. No security.txt at https://nc.redcenterstudio.com/.well-known/ (HTTP 404, 2026-11-18). No security.txt at https://redcenterstudio.com/.well-known/ (HTTP 404, 2026-11-18). Source: nc.redcenterstudio.com/.well-known/security.txt · read 2026-11-18.
  • A2A agent card. No A2A agent card at https://nc.redcenterstudio.com/.well-known/ (HTTP 404, 2026-11-18). No A2A agent card at https://redcenterstudio.com/.well-known/ (HTTP 404, 2026-11-18). Source: nc.redcenterstudio.com/.well-known/agent-card.json · read 2026-11-18.

Read as text from published files and outside lists. Nothing was installed or run, and no tool was called. A fact, not a rating. How each fact is read

Does the registry listing match what we found?

Feature #6

The registry checks an entry when it is published (each new version), and nothing re-checks it on a schedule. A difference below is about the listing, not a judgement of the publisher.

Registry saysWe foundResultSource · date
Remote endpoint nc.redcenterstudio.com/mcpSession openedmatchesour test · 2026-11-18
No credential declared as requiredOpened a session without any credentialmatchesour test · 2026-11-18
Repository github.com/Red-Center-Studio/claude-connectorsOpens publiclymatchesapi.github.com · 2026-11-18

Who made it?

Feature #7 · lineage

Facts about the publisher. We do not turn them into a trust score.

Namespace
io.github.Red-Center-Studio · 7 servers
GitHub owner
an organization (Red-Center-Studio)
Repository
github.com/Red-Center-Studio/claude-connectors
Stars
0
Repository age
0–30 days
Last push
0–30 days ago
Archived
no
Security policy
none found (we looked for SECURITY.md in the repository and in its owner’s .github repository)

Source: the registry entry and api.github.com · 2026-11-18; security policy read from GitHub · 2026-11-16.

Publish this server? Run these checks against it yourself before release, from your own machine: a server the command starts, or your own server at its URL after a one-time proof that you control it: npx protocolprobe-selftest.

Tool list changes

Our reads compared · no tool called

Hosted endpoint nc.redcenterstudio.com/mcp

1 of 1 comparison between consecutive reads showed a change (2 reads, 2026-11-16 to 2026-11-18; versions 0.3.0 to 0.4.0).

Last change seen between our reads on 2026-11-16 (version 0.3.0) and 2026-11-18 (version 0.4.0).

Added (8):

nc_basketnc_changesnc_compile_plannc_finalise_quotenc_forgetnc_movenc_previewnc_preview_status

Changed (1):

nc_connect: description, input schema

Compared from the tool lists our read-only connection recorded, separately for each hosted endpoint and each package: each tool's name, title, description, input schema and annotations (the order of keys and of tools is ignored). We see a list only when we read it: a change is shown between the two reads where we first saw it, and anything after 2026-11-18 is not known yet. No tool was called. How it is compared

Choosing

Record checks

Public records · not a safety rating

4 of 5 record checks met · 4 do not apply

  • Not ranked by downloads: a remote server publishes no download figure
  • Not ranked by stars: 0 stars (ranked from 10)
  • MetRegistry entry is active and says how to run itActive, with a package or a remote address.
  • MetSource repository link opensThe linked GitHub repository is public.
  • MetRepository is not archivedNot archived.
  • MetCode pushed to the repository in the 90 days before our checkLast push 0-30 days before our check.
  • Not metRepository publishes a security policy (SECURITY.md)No SECURITY.md in the places GitHub reads it from.What changes this check: GitHub's documentation describes adding a SECURITY.md from the repository's security settings: under Reporting, Security policy, Start setup. GitHub: adding a security policy
  • Does not applyPackage names its licence with a standard (SPDX) identifierRemote server: it ships no package.
  • Does not applyThe version the registry lists can be installed and is not withdrawnRemote server: it ships no package.
  • Does not applynpm package carries build provenance (attestation)Remote server: it ships no package.
  • Does not applyNo known critical or high advisory in the package or its dependenciesRemote server: it ships no package.

Read from public records only: the registry entry, npm/PyPI, GitHub and advisory databases, checked 2026-11-18 (security policy 2026-11-16). No tool was called. Only “met” and “not met” are counted, so the total differs between servers; a check that does not apply or that we could not run is listed, never counted against it. It is not a safety rating, and the same rules apply to every server. How each check works · Leaderboards · How we stay neutral

Common questions about io.github.Red-Center-Studio/nocode-migrator

Answered from the data above

Who publishes io.github.Red-Center-Studio/nocode-migrator?

The registry ties the namespace io.github.Red-Center-Studio to the GitHub account Red-Center-Studio; only its owner can publish under it. Its linked repository, github.com/Red-Center-Studio/claude-connectors, belongs to the same GitHub account. These are facts from the registry and GitHub, not a rating.

Is io.github.Red-Center-Studio/nocode-migrator safe to install?

We do not rate servers as safe or unsafe. 4 of its 5 applicable record checks are met (facts from public records, each listed on this page). What the records show: Its source repository opens publicly. Its repository had a push in the last 90 days. These are facts with their sources on this page, not a safety guarantee, and we did not run its tools.

Does io.github.Red-Center-Studio/nocode-migrator need an API key or sign-in?

It opened a session without any credential on 2026-11-18. The registry entry declares no required credential; no declaration is not a guarantee.

Has io.github.Red-Center-Studio/nocode-migrator been security tested?

Partly. 2 of the 14 checks that apply to it were exercised. It accepted a session without any credential and lists tools whose names suggest they change data. We did not call them. ProtocolProbe publishes no security verdict for a named server.

Does io.github.Red-Center-Studio/nocode-migrator publish a security policy?

We found no SECURITY.md in its repository (root, .github/ or docs/) or in its owner's .github repository.

Where is the source code of io.github.Red-Center-Studio/nocode-migrator?

In github.com/Red-Center-Studio/claude-connectors, which opens publicly.

Found this page useful?

Anonymous · no sign-in

A quick, anonymous reaction — no account, no email. One per kind from your browser. The tally updates when the page is next refreshed, and it is only a rough count, never a safety rating or a measured number of people.

Compare with another server

Side by side: registry entry, our read-only session, the tools and the 18 classification fields. Same values as each page; no score.

Security testing

What did we test, and what did we leave out?

18 checks · features #1, #2

Open without sign-in

It accepted a session without any credential and lists tools whose names suggest they change data. We did not call them. No security score is given; a check we did not run is never counted as passed.

The 18 checks at a glanceour test · 2026-11-18
  1. Inventory: exercised
  2. Hidden instructions: exercised
  3. Real execution: not run · our policy
  4. Secret leak: not run · nothing to check it against
  5. Internal addresses: not run · our policy
  6. Unconfirmed changes: not run · our policy
  7. Bad input: not run · our policy
  8. Model requests: not run · nothing to check it against
  9. Sensitive questions: not run · nothing to check it against
  10. Folder boundary: not run · our policy
  11. Log leaks: not run · nothing to check it against
  12. Hidden content: not run · nothing to check it against
  13. Fake assistant turns: not applicable
  14. Token passthrough: not applicable
  15. Token audience: not applicable
  16. Sign-in redirect: not run · our policy
  17. Consent handling: not testable from outside
  18. Sign-in metadata: not applicable

2 exercised12 not run (reason given)4 not applicable

Each check ends in exactly one state: exercised, not run (with the reason), or not applicable (with the reason). 2 of the 14 checks that apply to it were exercised. We do not publish security-check outcomes for named servers. These 18 checks are separate from the record checks at the top of this page, which read public records only.

Exercised · 2
  • 1Inventory
    tool-list
    Reads the declared tools, resources and prompts.exercised
  • 2Hidden instructions
    description-poisoning
    Looks for hidden instructions in tool descriptions.exercised
Not run, with the reason · 12
  • 3Real execution
    real-execution
    Calls a tool and checks what really happens.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 4Secret leak
    canary-leak
    Plants a fake secret and checks whether it leaks.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 5Internal addresses
    ssrf
    Checks whether a tool can be steered to internal addresses.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 6Unconfirmed changes
    write-without-confirmation
    Checks whether tools that change data act without asking.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 7Bad input
    error-handling
    Sends bad input and watches how the server answers.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 8Model requests
    sampling
    Checks whether the server asks the client's model to act for it.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 9Sensitive questions
    elicitation-sensitive-data
    Checks whether the server asks users for sensitive data.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 10Folder boundary
    root-boundary
    Checks whether the server reaches outside the folders it was given.This check calls the server's tools. ProtocolProbe calls no server's tools for anything it publishes, except for a server whose operator has claimed it and given permission (that server's page says so); an operator can run this check on their own server with our self-test command.not run · our policy
  • 11Log leaks
    logging-side-channel
    Checks whether log messages carry data they should not.This check needs at least one successful tool call to have something to check, and no tool was called.not run · nothing to check it against
  • 12Hidden content
    audience-hiding
    Checks resources that hide content from the user.This check needs content the server returns, and nothing was read or called.not run · nothing to check it against
  • 16Sign-in redirect
    open-redirect
    Checks the sign-in redirect for abuse.Testing the sign-in redirect means sending probes to the operator's sign-in service, which we do not do.not run · our policy
  • 17Consent handling
    confused-deputy
    Checks consent handling when one service acts for another.Depends on the operator's own consent screen, which differs per server and cannot be tested from outside.not testable from outside
Does not apply to this server · 4
  • 13Fake assistant turns
    fake-assistant-turn
    Checks prompts that pose as the assistant's own words.The server exposes no prompts.not applicable
  • 14Token passthrough
    token-passthrough
    Checks whether the server forwards a user's token to other services.The server opened a session without sign-in, so there is no token flow to check.not applicable
  • 15Token audience
    token-audience-validation
    Checks whether tokens meant for another service are accepted.The server opened a session without sign-in, so there is no token flow to check.not applicable
  • 18Sign-in metadata
    oauth-url-scheme
    Checks the published sign-in metadata for unsafe URLs.No sign-in (OAuth) metadata is published, so there are no sign-in addresses to check.not applicable

Source: our own test, 2026-11-18, mcp-runtime-engine@0.1.0. Which checks count and why follows our published scoring model.

What happened during the test?

Feature #8

The steps in order, as the test record holds them.

  1. 0 msStarted a read-only session with the server's remote endpoint
  2. 927 msConnected after 0 redirects. No credential was sent or needed.
  3. Read the inventory: 22 tools, 0 resources, 0 prompts.
  4. 2,292 msFinished: 2 checks exercised.

Reference

How is it classified?

18 fields

One value per field, each with its source. Fields written by AI models are marked. A field with no value says why.

TopicAI-classified
pending: added at the next monthly refresh
listed 2026-11-18; not classified yet
Pricing modelAI-classified
pending: added at the next monthly refresh
the website is not read yet
Programming language
not stated
GitHub detects no source language in this repository (docs-only or empty)
Hosting type
registry · 2026-11-18
MCP capability
tools
our test · 2026-11-18
Transport
streamable HTTP
registry · 2026-11-18
Required credentials
none declared
registry · 2026-11-18 · no declaration is not a guarantee
Package registry
does not apply
remote-only server: no package is shipped, so there is no package registry
Freshness
0–30 days
registry updatedAt · 2026-11-18
Lifecycle status
registry · 2026-11-18
License class
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Integrity hash
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Signature / provenance
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Dependency advisories
does not apply
ships no package, so there are no dependencies to audit
Popularity
does not apply
remote-only server: ships no package, so there is nothing to look up in a package registry
Publisher signals
owner: an organization · repository age: 0–30 days · stars: 0–9
api.github.com · 2026-11-18
Maintenance
api.github.com · 2026-11-18
Environment
the publisher's infrastructure
where it runs, from the hosting type · 2026-11-18

“Not stated” means the source did not state it; “does not apply” means it does not apply to this kind of server; “our limit” means our own lookup failed. A linked value opens the directory filtered to the same value.

Cite or correct this page

Sources and corrections

Suggested citation

ProtocolProbe. “io.github.Red-Center-Studio/nocode-migrator: MCP server record.” Data checked 2026-11-18. https://protocolprobe.com/mcp/servers/io.github.Red-Center-Studio/nocode-migrator

Figures are valid for the date shown. Our facts on this page are CC BY 4.0: reuse them with a link and the check date. Quoted text (the publisher’s descriptions, website quotes, tool names) is not ours to license.

As JSON: this record in the API · API documentation.

Badge for your README

ProtocolProbe: 4 of 5 record checks met

[![ProtocolProbe](https://protocolprobe.com/api/v1/badge/io.github.Red-Center-Studio/nocode-migrator)](https://protocolprobe.com/mcp/servers/io.github.Red-Center-Studio/nocode-migrator)

It shows this server's record-check count: facts from public records, no tool called. It is not a security rating or a pass. It links here and updates after each data reload.

Something wrong, or is this yours?

If a fact here is wrong, tell us and we will re-check it. If you operate this server, you can run our checks on it yourself with the free self-test command; we call no server’s tools ourselves for anything shown here, except for a server whose operator has claimed it and given permission (that server's page says so).

Write to hello@protocolprobe.com · corrections log · methodology